Convert a Bambu Studio 3MF to PrusaSlicer
Drop a one-plate Bambu Studio project below, pick your Prusa printer and print profile, and download a 3MF that PrusaSlicer opens with its own profiles. Objects and painted colors come across; print settings come from the print profile you pick. It runs in your browser and nothing is uploaded.
- Runs on your device, nothing is uploaded
- No account
- Your original file is never changed
What changes in PrusaSlicer
| Part of the project | In the converted file |
|---|---|
| Objects and painted colors | Kept |
| Print settings you changed in Bambu Studio | Not carried: the print profile you pick applies |
| Plates | One plate only: the converter writes PrusaSlicer projects as one bed |
| Bambu Studio printer and filament presets | PrusaSlicer's own for your printer |
| Sliced plates | Left out: slice again |
Check before you print
- Supports, infill and walls: they come from the print profile you pick, so set them again in PrusaSlicer if you had changed them.
- Multi-color projects need a printer that holds every color, such as one with an MMU or the XL with enough toolheads.
- Slice again in PrusaSlicer before you send the job.
Questions
Why don't my changed print settings come across?
PrusaSlicer and Bambu Studio store print settings under different names, and the converter doesn't map Bambu Studio's settings to PrusaSlicer's yet. It applies the print profile you pick instead.
Can I convert a project with several plates?
Not to PrusaSlicer: the converter writes a PrusaSlicer project as one bed. Save each plate as its own project in Bambu Studio and convert them one at a time, or convert the whole project to OrcaSlicer.
Which Prusa printers can I pick?
Every printer in PrusaSlicer's built-in Prusa Research profiles. The converter starts on the first one that holds as many colors as your busiest plate.
Does it work the other way, from PrusaSlicer to Bambu Studio?
Yes. Open the 3MF converter and drop a PrusaSlicer project with one bed. PrusaSlicer 3 projects with support, seam or fuzzy-skin painting can't be converted yet.
Is my project uploaded?
No. The conversion runs in your browser tab. The page downloads PrusaSlicer's profiles, and your project never leaves your computer.
Other conversions
Switch to PrusaSlicer for good
Meshory finds the projects in the folders you add, NAS shares included, converts them with your own PrusaSlicer presets and opens the result in PrusaSlicer.